Description

This connector provides hardware monitoring for Dell EMC XtremIO Storage Array for X1 and X2 Cluster types. It monitors the Enclosure, Controllers, Logical and Physical Disks as well as the various environment sensors (Temperature, Fans, Power Supplies, Memory, Batteries and Network cards).

Target

Typical platform: X1

Operating system: Storage System

Prerequisites

Relies on:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell XtremIO - REST connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • GET /api/json/v2/types/clusters
  • Request Header:
    EmbeddedFile(1)
  • The response body contains: "clusters" (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Model Serial Number Type Vendor	Status
  Disk Controller (MS_HW_DISKCONTROLLER)	Firmware Version Model Serial Number	Controller Status
  Battery (MS_HW_BATTERY)	Firmware Version Model Serial Number	Charge Status
  Fan (MS_HW_FAN)		Status
  Logical Disk, RAID (MS_HW_LOGICALDISK)	Logical Disk Type Size	Status
  Memory Module (MS_HW_MEMORY)		Status
  Network Card, FC Port (MS_HW_NETWORK)	Device Type Firmware Version Physical Address Physical Address Type	Link Speed Link Status Status
  Physical Disk (MS_HW_PHYSICALDISK)	Additional Information 1 Firmware Version Model Serial Number Size Vendor	Status
  Power Supply (MS_HW_POWERSUPPLY)	Power (Nominal) Power Supply Type	Status
  Temperature Sensor (MS_HW_TEMPERATURE)		Status