Description

This connector provides hardware monitoring through Dell's iDRAC Management Card for Dell servers with iDRAC9 or later. It monitors the Enclosure and Physical Disks as well as the various environment sensors (CPUs, Temperatures, fans, power supplies, Memory, Disk Controllers, batteries and Network cards).

Target

Typical platform: iDRAC9 REST

Operating system: Out-of-Band

Prerequisites

Relies on:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell iDRAC9 (REST) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • GET /redfish/v1
  • Request Header:
    EmbeddedFile(1)
  • The response body contains: Integrated Dell Remote Access Controller (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Model Serial Number Type Vendor	Status
  Disk Controller (MS_HW_DISKCONTROLLER)	Firmware Version Model Vendor	Controller Status
  Battery (MS_HW_BATTERY)		Status
  Processor (MS_HW_CPU)	Maximum Speed Model Vendor	Status
  Fan (MS_HW_FAN)		Status
  Logical Disk, RAID (MS_HW_LOGICALDISK)	Size	Status
  Memory Module (MS_HW_MEMORY)	Model Serial Number Size Vendor	Status
  Network Card, FC Port (MS_HW_NETWORK)	Model Physical Address Physical Address Type Serial Number Vendor	Link Speed Link Status Status
  Physical Disk (MS_HW_PHYSICALDISK)	Model Serial Number Size Vendor	Status
  Power Supply (MS_HW_POWERSUPPLY)	Power (Nominal) Power Supply Type Serial Number	Status
  Temperature Sensor (MS_HW_TEMPERATURE)	Sensor Type/Location	Status Temperature
  Voltage Sensor (MS_HW_VOLTAGE)		Status