Description

This connector discovers and collects hardware health for NetApp SolidFire Storage Systems and communicates directly with the NetApp SolidFire System.

Target

Typical platform: NetApp SolidFire

Operating system: Storage System

Prerequisites

Relies on: SolidFire API

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The NetApp SolidFire (REST) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • POST /json-rpc/9.0
  • Request Header:
    Content-Type:text/plain
  • Request Body:
    {"method" : "GetClusterInfo", "id" : "Detection" }
  • The response body contains: {"id":"Detection" (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Model Serial Number Type Vendor	Power Consumption
  Disk Controller (MS_HW_DISKCONTROLLER)	Firmware Version Model Serial Number	Status
  Processor (MS_HW_CPU)	Maximum Speed Model Vendor	Status
  Fan (MS_HW_FAN)	Alarm Threshold Warning Threshold	Speed Status
  Logical Disk, RAID (MS_HW_LOGICALDISK)	Size	Status
  Memory Module (MS_HW_MEMORY)	Size	Status
  Network Card, FC Port (MS_HW_NETWORK)	Logical Address Logical Address Type Model Physical Address Physical Address Type	Link Speed Link Status Status
  Physical Disk (MS_HW_PHYSICALDISK)	Model Serial Number Size Type Vendor	Status
  Power Supply (MS_HW_POWERSUPPLY)		Status
  Temperature Sensor (MS_HW_TEMPERATURE)	Alarm Threshold Warning Threshold	Status Temperature
  Voltage Sensor (MS_HW_VOLTAGE)	Lower Threshold Upper Threshold	Status Voltage