Description

This connector discovers the environmental, physical disks, management network cards and fiber ports on Pure Storage FA Series arrays. It relies on the Pure Storage API version 1.3 and above.

Target

Typical platform: Pure Storage

Operating system: Storage System

Prerequisites

Relies on: Pure Storage REST API

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Pure Storage FA Series (REST) connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • POST /api/1.13/auth/apitoken
  • Request Header:
    EmbeddedFile(1)
  • Request Body:
    {"password":"%{PASSWORD}","username":"%{USERNAME}"}
  • The response body contains: api_token (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Model Serial Number Type Vendor	Status
  Blade (MS_HW_BLADE)	Blade Model Blade Name Device Type Serial Number	Status
  Fan (MS_HW_FAN)		Status
  Network Card, FC Port (MS_HW_NETWORK)	Physical Address Physical Address Type	Link Speed Link Status Status
  Other Device (MS_HW_OTHERDEVICE)	Device Type	Status
  Physical Disk (MS_HW_PHYSICALDISK)	Size Type	Status
  Power Supply (MS_HW_POWERSUPPLY)	Model Serial Number	Status Voltage
  Temperature Sensor (MS_HW_TEMPERATURE)		Status Temperature