Description

This connector provides hardware monitoring for SuperMicro Systems via Redfish REST API. It monitors the Enclosure and Physical Disks as well as the various environment sensors (CPUs, temperatures, fans, power supplies, Memory and Network cards).

Target

Typical platform: SuperMicro

Operating system: Out-of-Band

Prerequisites

Relies on:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The SuperMicro REST connector will be automatically activated, and its status will be reported as OK if all of the criteria below are met:

• The HTTP Request below to the managed host succeeds:
  • GET /redfish/v1/Systems/1
  • The response body contains: Supermicro (regex)

  Monitors

  Object Type	Discovered Properties	Collected Parameters
  Enclosure (MS_HW_ENCLOSURE)	Model Serial Number Type Vendor	Status
  Processor (MS_HW_CPU)	Maximum Speed Model Vendor	Status
  Fan (MS_HW_FAN)	Alarm Threshold Warning Threshold	Speed Speed Percent Status
  Memory Module (MS_HW_MEMORY)	Model Serial Number Size Type Vendor	Status
  Network Card, FC Port (MS_HW_NETWORK)	Physical Address	Link Speed Link Status Status
  Physical Disk (MS_HW_PHYSICALDISK)	Model Vendor	Status
  Power Supply (MS_HW_POWERSUPPLY)	Additional Information 1 Additional Information 2 Additional Information 3 Power (Nominal) Power Supply Type	Status
  Temperature Sensor (MS_HW_TEMPERATURE)		Status Temperature
  Voltage Sensor (MS_HW_VOLTAGE)		Status Voltage