Back to the list of classes

Hardware Temperature

PATROL Class: MS_HW_TEMPERATURE - Monitor Type: MONITOR - Monitor Category: System
No CDM Class defined.

Monitors the temperature of a specific device. Monitoring the temperature of the critical devices of your system allows you to take preventive action and avoid a crash from overheating.

Attributes (Parameters)

Name PATROL Name Units Default Thresholds Description
Status Status 0 = OK
1 = Degraded
2 = Failed

 WARN
if = 1 (Degraded)

 ALARM
if = 2 (Failed)

Temperature status.

Value set by temperatureColl.

Type: Availability
Status Information StatusInformation None None

Additional (textual) information about the current status of the temperature.

Value set by temperatureColl.

Type: Text
Temperature Temperature degrees Celsius None

Current temperature reading in Celsius degrees (°C). An alert is triggered if the temperature rises too high.

Value set by temperatureColl.

Note: Alert thresholds are set automatically by Hardware Sentry which should not be customized or modified.

Type:  KPI - Statistics - Default graph

Infoboxes (PATROL Console Only)

Name Description
PATROL ID PATROL internal identifier for the temperature sensor instance.
Temperature Sensor Information ......................................................................................................................................................................................................................................
Location Location of the temperature sensor.
Device ID ID of the monitored temperature sensor as communicated by the instrumentation layer.
Identifying Information Any additional information available for the temperature sensor.
Connector Information ......................................................................................................................................................................................................................................
Connector Display Name Display name of the connector currently used to monitor the temperature.
Connector ID PATROL ID of the connector currently used to monitor the temperature.
Connector File Name File name of the connector currently used to monitor the temperature.
Connector Version Version number of the connector.
Connector Date Connector build date.
Menu Command Description
Instant Hardware Health Report Displays a text box recapitulating miscellaneous information regarding the monitored device (properties of the object, its parameters, thresholds, etc.).
Pause Monitoring Pauses the selected temperature monitoring.
Resume Monitoring Resumes the selected temperature monitoring.
Remove Removes the selected temperature monitoring from the monitoring environment.
Refresh Parameters Refreshes all temperature parameters.
Keywords:
hardware km patrol