Generic UPS

Home

Back to the list of connectors

Description

This connector provides hardware monitoring of MIB-2 Standard UPS through an SNMP interface.

Connector ID: GenericUPS

This connector is superseded by:

APCUPS

Target

Typical platform: Any UPS which supports UPS-MIB (RFC1628)

Operating system: Out-of-Band

Prerequisites

Leverages:

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t management -f GenericUPS --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: management
  selectedConnectors: [ GenericUPS ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The Generic UPS connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.2.1.33 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.enclosure.energy` `hw.status{hw.type="enclosure",state="ok\|degraded\|failed"}` `hw.status{hw.type="enclosure",state="present"}`	`info` `model` `type` `vendor`
Battery	`hw.battery.charge` `hw.battery.time_left{state="discharging"}` `hw.status{hw.type="battery",state="ok\|degraded\|failed"}` `hw.status{hw.type="battery",state="present"}`	`type`
Temperature Sensor	`hw.status{hw.type="temperature",state="present"}` `hw.temperature` `hw.temperature.limit{limit_type="high.critical"}` `hw.temperature.limit{limit_type="high.degraded"}`	`sensor_location`
Voltage Sensor	`hw.status{hw.type="voltage",state="present"}` `hw.voltage` `hw.voltage.limit{limit_type="high.critical"}` `hw.voltage.limit{limit_type="low.critical"}`	`sensor_location`

Search Results for {{siteSearch | truncate:'50'}}

No results.