IBM BladeCenter Management Module

Description

This connector provides hardware monitoring of the IBM BladeCenter chassis through the IBM BladeCenter Management Module (SNMP-based). Needs to run remotely.

Connector ID: IBMBlade

Target

Typical platform: IBM BladeCenter

Operating system: Out-of-Band

Prerequisites

Leverages: IBM BladeCenter Management Module

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t management -f IBMBlade --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: management
  selectedConnectors: [ IBMBlade ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The IBM BladeCenter Management Module connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

An SNMP Get-Next on the OID 1.3.6.1.4.1.2.3.51.2.2.1.1.2 must return a value in the same subtree

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.enclosure.energy` `hw.status{hw.type="enclosure",state="present"}`	`info` `model` `serial_number` `type` `vendor`
Blade	`hw.blade.power_state{state="on\|off\|suspended"}` `hw.status{hw.type="blade",state="ok\|degraded\|failed"}` `hw.status{hw.type="blade",state="present"}`	`model` `blade_name` `serial_number`
Fan	`hw.fan.speed_ratio` `hw.fan.speed_ratio.limit{limit_type="degraded"}` `hw.status{hw.type="fan",state="ok\|degraded\|failed"}` `hw.status{hw.type="fan",state="present"}`
Other Device	`hw.status{hw.type="other_device",state="ok\|degraded\|failed"}` `hw.status{hw.type="other_device",state="present"}`	`info` `device_type`
Power Supply	`hw.status{hw.type="power_supply",state="ok\|degraded\|failed"}` `hw.status{hw.type="power_supply",state="present"}`	`info` `power_supply_type`
Temperature Sensor	`hw.status{hw.type="temperature",state="ok\|degraded\|failed"}` `hw.status{hw.type="temperature",state="present"}` `hw.temperature` `hw.temperature.limit{limit_type="high.critical"}` `hw.temperature.limit{limit_type="high.degraded"}`
Voltage Sensor	`hw.status{hw.type="voltage",state="present"}` `hw.voltage` `hw.voltage.limit{limit_type="high.critical"}` `hw.voltage.limit{limit_type="low.critical"}`	`sensor_location`

Search Results for {{siteSearch | truncate:'50'}}

No results.