Back to the list of connectors
NetApp Filer (SNMP)
Description
This connector discovers the enclosure and the disks of NetApp disk arrays (filer) as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.
Connector ID: NetApp
This connector supersedes:
Target
Typical platform: NetApp
Operating system: Storage System
Prerequisites
Leverages: NetApp SNMP Agent
Technology and protocols: SNMP
This connector is not available for the local host (it is applicable to remote hosts only).
Examples
CLI
hws HOSTNAME -t storage -f NetApp --snmp v2c --community publichws-config.yaml
hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: storage
  selectedConnectors: [ NetApp ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secureConnector Activation Criteria
The NetApp Filer (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID 1.3.6.1.4.1.789.1.1must return a value in the same subtree
Metrics
| Type | Collected Metrics | Specific Attributes (Labels) | 
|---|---|---|
| Enclosure | 
 | 
 | 
| Battery | 
 |  | 
| Blade | 
 | 
 | 
| Fan | 
 | 
 | 
| Logical Disk, RAID | 
 | 
 | 
| Network Card, FC Port | 
 | 
 | 
| Other Device | 
 | 
 | 
| Physical Disk | 
 | 
 | 
| Power Supply | 
 | 
 | 
| Temperature Sensor | 
 | 
 | 
Search Results for {{siteSearch | truncate:'50'}}
							{{resultArray.length}}
							
						
						
						
						
						
					
						No results.