Back to the list of connectors

Cisco Ethernet Switch

Description

This connector discovers the enclosure Cisco Ethernet switches as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.

Connector file name: MS_HW_CiscoEthernetSwitch.hdf

This connector supersedes:

Target

Typical platform: Cisco

Operating system: Network Device

Prerequisites

Leverages: Cisco SNMP Agent (ciscoMgmt)

Technology and protocols: SNMP

Connector Activation Criteria

The Cisco Ethernet Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.9.9.13.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Device Type
    • Physical Address
    • Physical Address Type
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
        Voltage Sensor (MS_HW_VOLTAGE)
        • Status
        • Voltage
          Keywords:
          hardware hdf patrol connectors
          No results.