Back to the list of connectors

HP Insight Management Agent - Drive Array

Description

This connector monitors the HP/Compaq Drive Arrays by connecting to the Storage Management SNMP sub-agent of the HP Insight Manager agent.

Connector file name: MS_HW_CpqDriveArrayNT.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: HP ProLiant

Operating systems: Microsoft Windows, Linux, HP OpenVMS, HP Tru64, Out-of-Band, Oracle Solaris

Prerequisites

Leverages: HP Insight Management Agents

Technology and protocols: SNMP

Connector Activation Criteria

The HP Insight Management Agent - Drive Array connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.232.3.2.2.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Additional Information 1
  • Firmware Version
  • Model
  • Serial Number
Battery (MS_HW_BATTERY)
  • Status
  • Model
Fan (MS_HW_FAN)
  • Status
  • Fan Type/Location
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Physical Disk (MS_HW_PHYSICALDISK)
  • Predicted Failure
  • Status
  • Additional Information 1
  • Serial Number
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Sensor Type/Location
Keywords:
hardware hdf patrol connectors
No results.