Back to the list of connectors

Dell OpenManage Storage Manager

Description

This connector enables the monitoring for direct attached Dell disk arrays monitoring through the Dell Storage Manager Agent.

Connector file name: MS_HW_DellStorageManager.hdf

This connector supersedes:

Target

Typical platform: Dell PowerEdge

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: Dell OpenManage Server Administrator

Technology and protocols: SNMP

Connector Activation Criteria

The Dell OpenManage Storage Manager connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10893.1.20 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Driver Version
  • Firmware Version
  • Model
Battery (MS_HW_BATTERY)
  • Status
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Additional Information 1
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Predicted Failure
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Serial Number
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
    Keywords:
    hardware hdf patrol connectors
    No results.