Back to the list of connectors

Dell iDRAC - Server

Description

This connector enables hardware monitoring for Dell iDRAC systems through the Dell's iDRAC Management Card for Dell servers with iDRAC7 or higher.

Connector file name: MS_HW_DelliDRACServer.hdf

This connector is superseded by:

Target

Typical platform: Dell PowerEdge

Operating system: Out-of-Band

Prerequisites

Leverages: Dell iDRAC Management Card (iDRAC7 or Later)

Technology and protocols: SNMP

Connector Activation Criteria

The Dell iDRAC - Server connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10892.5.4 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
  • Additional Information 1
  • Type
Processor (MS_HW_CPU)
  • Status
  • Additional Information 1
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Additional Information 1
  • Alarm Threshold
  • Fan Type/Location
  • Warning Threshold
Memory Module (MS_HW_MEMORY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Serial Number
  • Size
  • Vendor
Network Card, FC Port (MS_HW_NETWORK)
  • Link Status
  • Status
  • Physical Address
  • Physical Address Type
Other Device (MS_HW_OTHERDEVICE)
  • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
    • Additional Information 1
    • Power Supply Type
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
    • Additional Information 1
    • Alarm Threshold
    • Sensor Type/Location
    • Warning Threshold
    Voltage Sensor (MS_HW_VOLTAGE)
    • Status
    • Additional Information 1
    • Voltage Type
    Keywords:
    hardware hdf patrol connectors
    No results.