Back to the list of connectors

Dell EqualLogic PS Series

Description

Because multiple PS Systems can be managed by the same controller, the connector can discover multiple enclosures.

Connector file name: MS_HW_Equallogic.hdf

Target

Typical platform: Dell EqualLogic

Operating system: Storage System

Prerequisites

Leverages: Dell EqualLogic SNMP Agent (EQLGROUP-MIB)

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Dell EqualLogic PS Series connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.12740.2.1.11.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Firmware Version
  • Model
  • Serial Number
Battery (MS_HW_BATTERY)
  • Status
  • Type
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Alarm Threshold
  • Fan Type/Location
  • Warning Threshold
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • Logical Disk Type
  • Size
Physical Disk (MS_HW_PHYSICALDISK)
  • Error Count
  • Status
  • Additional Information 1
  • Firmware Version
  • Model
  • Serial Number
  • Size
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Temperature Sensor (MS_HW_TEMPERATURE)
  • Status
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Keywords:
hardware hdf patrol connectors
No results.