Back to the list of connectors

F5 BigIP Switch

Description

This connector discovers ports and the environment for F5 BigIP Switches (F5-BIGIP-SYSTEM-MIB)

Connector file name: MS_HW_F5BigIP.hdf

This connector supersedes:

Target

Typical platform: F5 BigIP

Operating system: Network Device

Prerequisites

Leverages: F5 SNMP Agent (bigipSystem)

Technology and protocols: SNMP

Connector Activation Criteria

The F5 BigIP Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.3375.2.1.3.5.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Speed
  • Status
  • Warning Threshold
Network Card, FC Port (MS_HW_NETWORK)
  • Bandwidth Utilization
  • Duplex Mode
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
  • Bandwidth
  • Physical Address
  • Physical Address Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Temperature
    • Warning Threshold
    Keywords:
    hardware hdf patrol connectors
    No results.