Back to the list of connectors

Fusion ioDrive (fio-status)

Description

This connector monitors the Fusion ioDrive accelerator card.

Connector file name: MS_HW_FusionIO.hdf

Target

Typical platform: Any system with Fusion IO

Operating systems: Microsoft Windows, Linux, Oracle Solaris

Prerequisites

Leverages: fio-status CLI utility

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

  • fio-status

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the patrol account:

patrol ALL=(root) NOPASSWD: fio-status

Connector Activation Criteria

The Fusion ioDrive (fio-status) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Oracle Solaris or Linux or Microsoft Windows
  • The command below succeeds on the monitored host
    • Command: fio-status -h
    • Output contains: usage: fio-status (regex)
  • The command below succeeds on the monitored host
    • Command: fio-status
    • Output contains: fct (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Model
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Size
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
Voltage Sensor (MS_HW_VOLTAGE)
  • Voltage
    No results.