Back to the list of connectors

HP Procurve (SNMP)

Description

This connector discovers the enclosure, fans, power supplies, temperatures, etc. of HP Procurve Network Switches.

Connector file name: MS_HW_HPProcurve.hdf

This connector supersedes:

Target

Typical platform: HP Procurve

Operating system: Network Device

Prerequisites

Leverages: HP Procurve (HP-ICF-CHASSIS)

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HP Procurve (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.2.1.2.2.1 must return a value in the same subtree
  • An SNMP Get-Next on the OID 1.3.6.1.4.1.11.2.14.11.1.2.6.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Additional Information 1
  • BIOS Version
  • Type
Fan (MS_HW_FAN)
  • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Bandwidth Utilization
    • Error Percent
    • Link Speed
    • Link Status
    • Received Bytes Rate
    • Received Packets Rate
    • Status
    • Transmitted Bytes Rate
    • Transmitted Packets Rate
    • Device Type
    • Physical Address
    • Physical Address Type
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
      Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      • Alarm Threshold
      Keywords:
      hardware hdf patrol connectors
      No results.