Back to the list of connectors

HP-UX (STM)

Description

This connector provides monitoring information for physical disks and memory modules on HP-UX systems through the Support Tools Manager utilities (stm).

Connector file name: MS_HW_HPUXStm.hdf

This connector is superseded by:

Target

Typical platforms: HP 9000, HP Integrity, HP SuperDome

Operating system: HP-UX

Prerequisites

Leverages: HP-UX Support Tools Manager (STM)

Technology and protocols: System Commands

Connector Activation Criteria

The HP-UX (STM) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is HP-UX
  • The command below succeeds on the monitored host
    • Command: /bin/ls /usr/bin/stm
    • Output contains: ^/usr/bin/stm$ (regex)
  • The command below succeeds on the monitored host
    • Command: /bin/echo "map"|/usr/bin/stm -c
    • Output contains: Active Tool (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Disk Controller (MS_HW_DISKCONTROLLER)
  • Model
Fan (MS_HW_FAN)
  • Status
  • Fan Type/Location
Memory Module (MS_HW_MEMORY)
  • Error Count
  • Status
  • Size
  • Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Error Count
  • Status
  • Serial Number
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Keywords:
hardware hdf patrol connectors
No results.