Back to the list of connectors

Hitachi Compute Blade Chassis

Description

This connector enables hardware monitoring for the Hitachi Compute Blade series chassis through the Hitachi Compute Blades Management Module.

Connector file name: MS_HW_HitachiComputeBlade.hdf

Target

Typical platform: Hitachi Compute Blade

Operating system: Out-of-Band

Prerequisites

Leverages: Hitachi Compute Blade Chassis Management Module

Technology and protocols: SNMP

Connector Activation Criteria

The Hitachi Compute Blade Chassis connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.116.5.52.1.1.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Power Consumption
  • Additional Information 1
  • BIOS Version
  • Model
  • Serial Number
  • Type
  • Vendor
Blade (MS_HW_BLADE)
  • Power State
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Blade Model
  • Serial Number
Fan (MS_HW_FAN)
  • Status
  • Fan Type/Location
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Device Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
    • Temperature
      Voltage Sensor (MS_HW_VOLTAGE)
      • Status
      • Voltage
        Keywords:
        hardware hdf patrol connectors
        No results.