Back to the list of connectors

MacroSan Storage System (SNMP)

Description

This connector discovers the enclosure and the disks of MacroSan disk arrays as well as various environment sensors (batteries, fans, power supplies). It relies on the SNMP protocol.

Connector file name: MS_HW_MacroSan.hdf

Target

Typical platform: MacroSan

Operating system: Storage System

Prerequisites

Leverages: MacroSan SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The MacroSan Storage System (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.35904.1.2.2.1.2.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Type
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
    Fan (MS_HW_FAN)
    • Status
      Logical Disk, RAID (MS_HW_LOGICALDISK)
      • Status
      • Size
      Other Device (MS_HW_OTHERDEVICE)
      • Status
      • Device Type
      Physical Disk (MS_HW_PHYSICALDISK)
      • Status
      • Additional Information 1
      • Additional Information 2
      • Model
      • Size
      Power Supply (MS_HW_POWERSUPPLY)
      • Status
        Keywords:
        hardware hdf patrol connectors
        No results.