Back to the list of connectors

NetApp E-Series

Description

This connector discovers the status of a NetApp E-Series storage array, including environment sensors (temperatures, fans, power supplies, etc.). It relies on NetApp SANtricity REST API.

Connector file name: MS_HW_NetappESeries.hdf

Target

Typical platform: NetApp E-Series

Operating system: Storage System

Prerequisites

Leverages:

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The NetApp E-Series connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The HTTP Request below to the managed host succeeds:
    • GET /devmgr/v2/storage-systems/1
    • The response body contains: "chassisSerialNumber": (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Type
  • Vendor
Disk Controller (MS_HW_DISKCONTROLLER)
  • Controller Status
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Vendor
Battery (MS_HW_BATTERY)
  • Status
  • Additional Information 1
  • Model
  • Type
Fan (MS_HW_FAN)
  • Status
    Logical Disk, RAID (MS_HW_LOGICALDISK)
    • Status
    • RAID Level
    • Size
    Memory Module (MS_HW_MEMORY)
    • Status
    • Model
    • Serial Number
    • Size
    • Vendor
    Network Card, FC Port (MS_HW_NETWORK)
    • Link Speed
    • Link Status
    • Status
    • Additional Information 1
    • Additional Information 2
    • Physical Address
    • Physical Address Type
    Other Device (MS_HW_OTHERDEVICE)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    • Device Type
    Physical Disk (MS_HW_PHYSICALDISK)
    • Endurance Remaining
    • Status
    • Additional Information 1
    • Additional Information 2
    • Firmware Version
    • Model
    • Serial Number
    • Size
    • Vendor
    Power Supply (MS_HW_POWERSUPPLY)
    • Status
    • Additional Information 1
    • Additional Information 2
    • Additional Information 3
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Status
      Keywords:
      hardware hdf patrol connectors
      No results.