Back to the list of connectors

StorageTek LSeries Tape Library

Description

This connector provides basic hardware monitoring of the StorageTek LSeries tape libraries through their built-in SNMP agent. Needs to run remotely.

Connector file name: MS_HW_StorageTekLSeries.hdf

Target

Typical platform: StorageTek LSeries

Operating system: Storage System

Prerequisites

Leverages: StorageTek LSeries SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The StorageTek LSeries Tape Library connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.1211.1.12.4.2.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Serial Number
  • Type
  • Vendor
Fan (MS_HW_FAN)
  • Status
  • Fan Type/Location
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Usage Count
  • Additional Label
  • Device Type
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Power Supply Type
Robotic (MS_HW_ROBOTICS)
  • Error Count
  • Move Count
  • Status
  • Additional Information 1
  • Additional Information 2
  • Serial Number
Tape Drive (MS_HW_TAPEDRIVE)
  • Mount Count
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
  • Model
  • Serial Number
  • Vendor
Temperature Sensor (MS_HW_TEMPERATURE)
  • Temperature
  • Alarm Threshold
  • Sensor Type/Location
  • Warning Threshold
Keywords:
hardware hdf patrol connectors
No results.