Back to the list of connectors

Oracle/Sun ZFS Storage Appliance

Description

This connector provides information about chassis, CPU, disk, fan, memory modules, PSU and PCIe cards status for ZFS Storage Appliances.

Connector file name: MS_HW_SunZFSStorageAppliance.hdf

Target

Typical platform: Oracle ZFS Storage Appliance

Operating system: Storage System

Prerequisites

Leverages: Oracle ZFS Command Line (SSH)

Technology and protocols: System Commands

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Oracle/Sun ZFS Storage Appliance connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The command below succeeds on the monitored host
    • Command: maintenance hardware show
    • Output contains: *NAME *STATE *MANUFACTURER *MODEL *SERIAL * (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Enclosure (MS_HW_ENCLOSURE)
  • Status
  • Model
  • Serial Number
  • Type
  • Vendor
Processor (MS_HW_CPU)
  • Status
  • Model
  • Vendor
Fan (MS_HW_FAN)
  • Status
  • Additional Information 1
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • Unallocated Space
  • RAID Level
  • Size
Memory Module (MS_HW_MEMORY)
  • Status
  • Model
  • Serial Number
  • Vendor
Network Card, FC Port (MS_HW_NETWORK)
  • Link Speed
  • Link Status
  • Device Type
  • Physical Address
  • Physical Address Type
Other Device (MS_HW_OTHERDEVICE)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Label
  • Device Type
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Model
  • Serial Number
  • Size
  • Vendor
Power Supply (MS_HW_POWERSUPPLY)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Additional Information 3
Keywords:
hardware hdf patrol connectors
No results.