Back to the list of connectors

LSI MegaCli

Description

This connector provides information about physical disks and array status.

Connector file name: MS_HW_LSIMegaCliWindows.hdf

This connector is superseded by:

Target

Typical platform: Any system with LSI MegaCli

Operating system: Microsoft Windows

Prerequisites

Leverages: Windows system commands (MegaCli / CmdTool2)

Technology and protocols: System Commands

This connector is not available for remote hosts (it is applicable to the local host only).

Connector Activation Criteria

The LSI MegaCli connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Microsoft Windows
  • The command below succeeds on the monitored host
    • Command: MegaCli -v -NoLog
    • Output contains: Exit Code: 0x00 (regex)
  • The command below succeeds on the monitored host
    • Command: MegaCli -PDList -aALL -NoLog
    • Output contains: [Pp][Dd] [Tt]ype (regex)

Monitors

Object Type Collected Parameters Discovered Properties
Disk Controller (MS_HW_DISKCONTROLLER)
  • BIOS Version
  • Firmware Version
  • Model
  • Serial Number
Battery (MS_HW_BATTERY)
  • Type
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Physical Disk (MS_HW_PHYSICALDISK)
  • Status
  • Additional Information 1
  • Additional Information 2
  • Model
  • Size
Keywords:
hardware hdf patrol connectors
No results.