Back to the list of connectors

LsiLogic MegaRAID SAS

Description

This connector enables the monitoring of disk through the LsiLogic MegaRAID SAS SNMP sub-agent which supports all LSI MegaRaid SAS RAID controllers.

Connector file name: MS_HW_LSIMegaRaidSAS.hdf

This connector is superseded by:

This connector supersedes:

Target

Typical platform: Fujitsu-Siemens PRIMERGY

Operating systems: Microsoft Windows, Linux

Prerequisites

Leverages: LSI MegaRAID SAS SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The LsiLogic MegaRAID SAS connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.3582.4.1.4.2.1.2.1 must return a value in the same subtree

Monitors

Object Type Collected Parameters Discovered Properties
Disk Controller (MS_HW_DISKCONTROLLER)
  • Driver Version
  • Firmware Version
  • Model
  • Vendor
Logical Disk, RAID (MS_HW_LOGICALDISK)
  • Status
  • RAID Level
  • Size
Physical Disk (MS_HW_PHYSICALDISK)
  • Error Count
  • Status
  • Size
  • Vendor
Keywords:
hardware hdf patrol connectors
No results.