Back to the list of connectors

HP-UX - Network

Connector file name: MS_HW_HPUXNetwork.hdf

This connector is superseded by:

This connector supersedes:


Discovers and monitors Ethernet adapters.


Typical platforms: HP 9000, HP Integrity, HP SuperDome

Operating system: HP-UX


Leverages: HP-UX system commands (lanscan, etc.)

Technology and protocols: System Commands

Connector Activation Criteria

The HP-UX - Network connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is HP-UX
  • The command below succeeds on the monitored host
    • Command: /usr/sbin/lanscan
    • Output contains: ^[0-9]+/[0-9]+/[0-9]+ (regex)


Object Type Discovered Properties Collected Parameters
Network Card, FC Port (MS_HW_NETWORK)
  • Model
  • Physical Address
  • Physical Address Type
  • Bandwidth Utilization
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
hardware hdf patrol connectors