Back to the list of connectors
McData Fibre Switch
Connector file name: MS_HW_McData.hdf
This connector supersedes:
Description
This connector discovers the enclosure and fiber-channel ports of McData SAN switches as well as the various environment sensors (temperatures, fans, power supplies, etc.). It relies on the SNMP protocol.
Target
Typical platform: McData SAN
Operating system: Storage System
Prerequisites
Leverages: McData SNMP Agent (EF-6000-MIB)
Technology and protocols: SNMP
Connector Activation Criteria
The McData Fibre Switch connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- An SNMP Get-Next on the OID
1.3.6.1.4.1.289.2.1.1.2.2.1.1
must return a value in the same subtree
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Blade (MS_HW_BLADE) |
|
|
Fan (MS_HW_FAN) |
|
|
Network Card, FC Port (MS_HW_NETWORK) |
|
|
Other Device (MS_HW_OTHERDEVICE) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors