Back to the list of connectors

Pure Storage FA Series (REST)

Connector file name: MS_HW_PureStorageREST.hdf

Description

This connector discovers the environmental, physical disks, management network cards and fiber ports on Pure Storage FA Series arrays. It relies on the Pure Storage API version 1.13 and above.

Target

Typical platform: Pure Storage

Operating system: Storage System

Prerequisites

Leverages: Pure Storage REST API

Technology and protocols: HTTP/REST

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The Pure Storage FA Series (REST) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • The HTTP Request below to the managed host succeeds:
    • POST /api/1.13/auth/apitoken
    • Request Header:
      EmbeddedFile(1)
    • Request Body:
      {"password":"%{PASSWORD}","username":"%{USERNAME}"}
    • The response body contains: api_token (regex)

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Model
  • Serial Number
  • Type
  • Vendor
  • Status
Blade (MS_HW_BLADE)
  • Blade Model
  • Blade Name
  • Device Type
  • Serial Number
  • Status
Fan (MS_HW_FAN)
    • Status
    Network Card, FC Port (MS_HW_NETWORK)
    • Physical Address
    • Physical Address Type
    • Link Speed
    • Link Status
    • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Device Type
    • Status
    Physical Disk (MS_HW_PHYSICALDISK)
    • Size
    • Type
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Model
    • Serial Number
    • Status
    • Voltage
    Temperature Sensor (MS_HW_TEMPERATURE)
      • Status
      • Temperature
      Keywords:
      hardware hdf patrol connectors