Back to the list of connectors

Adaptec - StorMan - RAID

Description

Gives information about physical disks and volumes of Adaptec SAS RAID controllers through the arcconf utility.

Connector ID: AdptStorManUnix

Target

Typical platform: Any system with Adaptec

Operating systems: Oracle Solaris, Linux

Prerequisites

Leverages: arcconf

Technology and protocols: System Commands

This connector requires advanced privileges on the managed host for the command below:

  • /[opt|usr]/StorMan/arcconf

This connector therefore needs to run as root or you need to configure a privilege-escalation mechanism like sudo on the managed host to allow the monitoring account to run the command listed above.

Sample of /etc/sudoers to allow the above command to be run as root by the hwsagent account:

hwsagent ALL=(root) NOPASSWD: /[opt|usr]/StorMan/arcconf

Examples

CLI

hws HOSTNAME -t solaris -f AdptStorManUnix --ssh -u USER --sudo-command-list /[opt|usr]/StorMan/arcconf

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: solaris
  selectedConnectors: [ AdptStorManUnix ] # Optional, to load only this connector
  ssh:
    username: <USERNAME> # Change with actual credentials
    password: <PASSWORD> # Encrypted using hws-encrypt
    useSudo: true
    useSudoCommands: [ "/[opt|usr]/StorMan/arcconf" ]

Connector Activation Criteria

The Adaptec - StorMan - RAID connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • Operating System is Oracle Solaris or Linux
  • The command below succeeds on the monitored host
    • Command: /bin/sh %EmbeddedFile(1)%
    • Output contains: Hard drive (regex)

Metrics

Type Collected Metrics Specific Attributes (Labels)
Disk Controller
  • hw.status{hw.type="disk_controller",state="ok|degraded|failed"}
  • hw.status{hw.type="disk_controller",state="present"}
  • info
  • driver_version
  • firmware_version
  • model
  • serial_number
Logical Disk, RAID
  • hw.logical_disk.limit
  • hw.status{hw.type="logical_disk",state="ok|degraded|failed"}
  • hw.status{hw.type="logical_disk",state="present"}
  • raid_level
Physical Disk
  • hw.physical_disk.size
  • hw.status{hw.type="physical_disk",state="ok|degraded|failed"}
  • hw.status{hw.type="physical_disk",state="present"}
  • info
  • model
  • serial_number
  • vendor
No results.