HP MP/GSP card

Description

Gives environmental information (temperatures, fans, etc.) on HP 9000 and Integrity servers through HP Integrated Lights-Out Management Card

Connector ID: HPiLO

Target

Typical platforms: HP 9000, HP Integrity, HP SuperDome

Operating system: Out-of-Band

Prerequisites

Leverages: HP MP/GSP card

Technology and protocols: SSH

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t management -f HPiLO --ssh -u USER

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: management
  selectedConnectors: [ HPiLO ] # Optional, to load only this connector
  ssh:
    username: <USERNAME> # Change with actual credentials
    password: <PASSWORD> # Encrypted using hws-encrypt

Connector Activation Criteria

The HP MP/GSP card connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

SSH is enabled on the monitored host
The connector sends [Ctrl-E]cf[Ctrl-B][Return]CM[Return]
The monitored host sends a prompt
The connector sends HE[Return]Q[Return]
The monitored host sends another prompt
The connector sends [Ctrl-B]X[Return]CO[Return]
The captured output contains Quit help (regex)

Metrics

Type	Collected Metrics	Specific Attributes (Labels)
Enclosure	`hw.enclosure.energy` `hw.status{hw.type="enclosure",state="ok\|degraded\|failed"}` `hw.status{hw.type="enclosure",state="present"}`	`model` `serial_number` `type` `vendor`
Fan	`hw.status{hw.type="fan",state="ok\|degraded\|failed"}` `hw.status{hw.type="fan",state="present"}`	`sensor_location`
Power Supply	`hw.status{hw.type="power_supply",state="ok\|degraded\|failed"}` `hw.status{hw.type="power_supply",state="present"}`	`power_supply_type`
Temperature Sensor	`hw.status{hw.type="temperature",state="ok\|degraded\|failed"}` `hw.status{hw.type="temperature",state="present"}`	`sensor_location`

Search Results for {{siteSearch | truncate:'50'}}

No results.