Back to the list of connectors

Aruba (SNMP)

Connector file name: MS_HW_Aruba.hdf

This connector supersedes:

Description

This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.

Target

Typical platform: Aruba

Operating system: Network Device

Prerequisites

Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The Aruba (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.14823.2.2.1.2 must return a value in the same subtree

Monitors

Object Type Discovered Properties Collected Parameters
Enclosure (MS_HW_ENCLOSURE)
  • Device Hostname
  • Model
  • Type
  • Vendor
    Fan (MS_HW_FAN)
      • Status
      Network Card, FC Port (MS_HW_NETWORK)
      • Device Type
      • Physical Address
      • Physical Address Type
      • Bandwidth Utilization
      • Error Percent
      • Link Speed
      • Link Status
      • Received Bytes Rate
      • Received Packets Rate
      • Status
      • Transmitted Bytes Rate
      • Transmitted Packets Rate
      Power Supply (MS_HW_POWERSUPPLY)
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
          • Status
          • Temperature
          Keywords:
          hardware hdf patrol connectors