Back to the list of connectors

HP Procurve (SNMP)

Connector file name: MS_HW_HPProcurve.hdf

This connector supersedes:


This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.


Typical platform: HP Procurve

Operating system: Network Device


Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HP Procurve (SNMP) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID must return a value in the same subtree


Object Type Discovered Properties Collected Parameters
  • Additional Information 1
  • BIOS Version
  • Type
    Fan (MS_HW_FAN)
      • Status
      Network Card, FC Port (MS_HW_NETWORK)
      • Device Type
      • Physical Address
      • Physical Address Type
      • Bandwidth Utilization
      • Error Percent
      • Link Speed
      • Link Status
      • Received Bytes Rate
      • Received Packets Rate
      • Status
      • Transmitted Bytes Rate
      • Transmitted Packets Rate
      Power Supply (MS_HW_POWERSUPPLY)
        • Status
        Temperature Sensor (MS_HW_TEMPERATURE)
        • Alarm Threshold
        • Status
        • Temperature
        hardware hdf patrol connectors