Back to the list of connectors

MIB-2 Standard SNMP Agent - Network Interfaces

Connector file name: MS_HW_MIB2.hdf

This connector is superseded by:

This connector supersedes:


This connector discovers the enclosure and Ethernet ports of a system equipped with an MIB-2 standard SNMP Agent.


Typical platform: Any system with SNMP

Operating systems: Network Device, Out-of-Band, HP-UX, Storage System, HP OpenVMS, HP Tru64


Leverages: MIB-2 Standard SNMP Agent

Technology and protocols: SNMP

Connector Activation Criteria

The MIB-2 Standard SNMP Agent - Network Interfaces connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID must return a value in the same subtree


Object Type Discovered Properties Collected Parameters
Network Card, FC Port (MS_HW_NETWORK)
  • Device Type
  • Physical Address
  • Physical Address Type
  • Bandwidth Utilization
  • Error Percent
  • Link Speed
  • Link Status
  • Received Bytes Rate
  • Received Packets Rate
  • Status
  • Transmitted Bytes Rate
  • Transmitted Packets Rate
hardware hdf patrol connectors