Back to the list of connectors
Quantum DXi (SSH)
Connector file name: MS_HW_QuantumDXi.hdf
Description
This connector discovers the enclosure, fans, memory, voltages and temperatures of the DXi appliance.
Target
Typical platform: Quantum DXi
Operating system: Storage System
Prerequisites
Leverages: Commands on the Quantum DXi controller
Technology and protocols: SSH
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The Quantum DXi (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- SSH is enabled on the monitored host
- The monitored host sends a prompt
- The connector sends
syscli --getstatus syscomponent --systemboard[Return]
- The monitored host sends another prompt
- The connector sends
logout[Return] quit[Return] exit[Return]
- The captured output contains
System Component
(regex)
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Disk Controller (MS_HW_DISKCONTROLLER) |
|
|
Battery (MS_HW_BATTERY) |
|
|
Fan (MS_HW_FAN) |
|
|
Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
Memory Module (MS_HW_MEMORY) |
|
|
Network Card, FC Port (MS_HW_NETWORK) |
|
|
Other Device (MS_HW_OTHERDEVICE) |
|
|
Physical Disk (MS_HW_PHYSICALDISK) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Voltage Sensor (MS_HW_VOLTAGE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors