Back to the list of connectors

HP BladeSystem (SSH)

Connector file name: MS_HW_HPBladeTelnet.hdf

This connector supersedes:


This connector provides hardware monitoring for the HP BladeSystem racks through the Onboard Administrator.


Typical platform: HP BladeSystem

Operating system: Out-of-Band


Leverages: HP BladeSystem Onboard Administrator

Technology and protocols: SSH

This connector is not available for the local host (it is applicable to remote hosts only).

Connector Activation Criteria

The HP BladeSystem (SSH) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • SSH is enabled on the monitored host
  • The monitored host must send >
  • The connector sends quit[Return]
  • The captured output contains HP.* BladeSystem Onboard Administrator (regex)


Object Type Discovered Properties Collected Parameters
  • Model
  • Serial Number
  • Type
  • Power Consumption
  • Status
  • Blade Model
  • Blade Name
  • Serial Number
  • Power State
  • Status
    • Speed Percent
    • Status
    Other Device (MS_HW_OTHERDEVICE)
    • Additional Label
    • Device Type
    • Status
    Power Supply (MS_HW_POWERSUPPLY)
    • Power (Nominal)
    • Status
    • Used Watts
    Temperature Sensor (MS_HW_TEMPERATURE)
    • Alarm Threshold
    • Warning Threshold
    • Status
    • Temperature
    hardware hdf patrol connectors