Back to the list of connectors
HP iLO Gen 10 (REST)
Connector file name: MS_HW_HPEGen10IloREST.hdf
Description
This connector discovers the status of an HPE Proliant Gen 10 system using iLO 5, as well as the various environment sensors (temperatures, fans, power supplies, etc.). Requires iLO 5.
Target
Typical platform: HP iLO Gen 10 REST
Operating system: Out-of-Band
Prerequisites
Requires KM Version: 10.3.00 or greater
Leverages:
Technology and protocols: HTTP/REST
This connector is not available for the local host (it is applicable to remote hosts only).
Connector Activation Criteria
The HP iLO Gen 10 (REST) connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:
- The KM is in version 10.3.00 or greater
- The HTTP Request below to the managed host succeeds:
- GET
/redfish/v1/
- Request Header:
EmbeddedFile(1)
- The response body contains:
iLO 5
(regex)
- GET
Monitors
Object Type | Discovered Properties | Collected Parameters |
---|---|---|
Enclosure (MS_HW_ENCLOSURE) |
|
|
Disk Controller (MS_HW_DISKCONTROLLER) |
|
|
Battery (MS_HW_BATTERY) |
|
|
Processor (MS_HW_CPU) |
|
|
Fan (MS_HW_FAN) |
|
|
Logical Disk, RAID (MS_HW_LOGICALDISK) |
|
|
Memory Module (MS_HW_MEMORY) |
|
|
Network Card, FC Port (MS_HW_NETWORK) |
|
|
Physical Disk (MS_HW_PHYSICALDISK) |
|
|
Power Supply (MS_HW_POWERSUPPLY) |
|
|
Temperature Sensor (MS_HW_TEMPERATURE) |
|
|
Keywords:
hardware hdf patrol connectors
hardware hdf patrol connectors