Back to the list of connectors

DELL PowerSwitch S-Series

Description

This connector provides hardware monitoring through the switch's SNMP Agent

Connector ID: DellNetworkSwitch

Target

Typical platform: DELL PowerSwitch S4000 Series

Operating system: Network Device

Prerequisites

Leverages: Switch's SNMP agent

Technology and protocols: SNMP

This connector is not available for the local host (it is applicable to remote hosts only).

Examples

CLI

hws HOSTNAME -t network -f DellNetworkSwitch --snmp v2c --community public

hws-config.yaml

hosts:
- host:
    hostname: <HOSTNAME> # Change with actual host name
    type: network
  selectedConnectors: [ DellNetworkSwitch ] # Optional, to load only this connector
  snmp:
    version: v1 # Read documentation for v2 and v3
    community: public # or probably something more secure

Connector Activation Criteria

The DELL PowerSwitch S-Series connector will be automatically activated, and its status will be reported as OK if all the below criteria are met:

  • An SNMP Get-Next on the OID 1.3.6.1.4.1.674.10895.3000.1.2.100.2 must return a value in the same subtree and contains ^Dell Networking Ethernet (regex)

Metrics

Type Collected Metrics Specific Attributes (Labels)
Enclosure
  • hw.enclosure.energy
  • hw.status{hw.type="enclosure",state="ok|degraded|failed"}
  • hw.status{hw.type="enclosure",state="present"}
  • info
  • bios_version
  • model
  • serial_number
  • type
  • vendor
Fan
  • hw.fan.speed
  • hw.status{hw.type="fan",state="ok|degraded|failed"}
  • hw.status{hw.type="fan",state="present"}
    Power Supply
    • hw.status{hw.type="power_supply",state="ok|degraded|failed"}
    • hw.status{hw.type="power_supply",state="present"}
      No results.